Machinery Vibration Warning Lights

Machinery preventative maintenance is paramountinternal problem causing a vibration from
in today's factory. A machine going down can bedestroying bearings, internal or exterior parts by
catastrophic to the assembly line and many timesan automatic shut down and/or a warning light
specialized parts are not even available. Oftenalerting the team that there is a major
such catastrophic failure or damage to a piece ofproblem.Machinery of this type is much to
machinery can be avoided thru early warningexpensive to risk to a faulty switch or power
detection of the problem. Sometimes sensors doproblem so the warning light should be lighted
no pick up every problem or fail. We always hearusing electromagnetic induction technology to
about faulty lights in airliners when the aircraft hascharge a capacitor instead of the lights working
to return only to find out that a light was out. Inoff a battery or power source.Currently there are
machinery some warning lights go on, if their lightsome nifty micro-flashlights being used which you
goes out and others show nothing and then whencan buy which use a similar technique and are
there is a problem no light?Most machinery giveavailable thanks to the Everlite Flashlight
off tell tale signs premature of the failure whethertechnology research lab. These smaller flashlights
or not a light is warning available or not. A reallywork by shaking them for about thirty seconds
good mechanic, ship engine room technician orand shine for about 6 minutes and they shine
factory maintenance expert can tell when thingsquite bright since they use a very bright LED light.
are not running right, but not all. I propose aHere is a link to this home use flashlight: vibrational
vibrational warning system, either with anwarning lights can be used to monitor from long
automatic shut off or a light, which shines into thedistances, whether the equipment be a short or
operations room like a beam from a pin-light nightlong distance from view. Additionally these
vision pointer or construction high tech surveyingwarnings systems have hundreds of application
level. This can be done by shining the beam ontofor portable system where mainstream power
a mirror connected to the warning light, which isgrid energy is not available. Think on it.Lance
bolted to the base of the machine. By earlyWinslow - Online Think Tank forum board.
detection we can prevent a bad mounting bolt, or