The L3 laser transmitter and the R6 laser receiver carry a one year warranty against defects in workmanship and materials.

L3 Manual The L3 is aimed at the professional home builder, room addition contractor, or tenant improvement contractor who wants a manually leveled and plumbed laser. The L3 features a highly visible red rotating beam, along with a plumb spot. The plumb spot can be used to transfer points from floor to ceiling, and will provide a 90 degree reference when the laser is in its vertical mode. Additionally, the L3 features a level vial with markings for 1-4% slope. The L3 should be used with the optional R6 electronic laser receiver for outdoor or long range work. Options: R6 Receiver, VM2 Vertical Mounting Bracket, W1 Wall/Ground Bracket, B1 Ni-Cad Charger Kit

Visible Radius	30m (100ft)
Range	100m Radius
Accuracy	6mm 30m
Scan Capability	yes: 15 - 90 degrees
Vertical Capability	yes (Requires optional VM2 Bracket)
Power	2 D-Cell Batteries
Battery Life	60 + hours (Alkaline) Less with Ni-Cad
Coverage	360º
Rotation	0 to 600rpm

The L5 laser transmitter and the R6 laser receiver carry a one year warranty against defects in workmanship and materials.

L5 Internal/Extenal The L5 is a new product aimed at the professional home builder, room addition contractor, or tenant improvement contractor. It features a highly visible red rotating beam, along with a plumb spot. The plumb spot can be used to transfer points from floor to ceiling, and will provide a 90 degree reference when the laser is in its vertical mode. The L5 should be used with the optional R6 electronic laser receiver for outdoor or long range work. The laser self levels in its horizontal mode via a wire hung, air damped compensator, and is manually plumbed and aligned in its vertical mode. The L5 features a scan mode where the beam will oscillate in a selectable arc of 15-90 degrees. Options: R6 Receiver, VM2 Vertical Mounting Bracket, W1 Wall/Ground Bracket, B1 Ni-Cad Charger Kit

Visible Radius	30m (100ft)
Radius with R3 Detector	100m (500ft)
Accuracy	4.7mm/30m (1/4" @ 100ft)
Scan Capability	Yes: 15 - 90 degrees
Coverage	360º
Rotation Speed	0-600 rpm
Power	2 D-cell batteries
Battery Life	60+ Hours

L1-AS External This is another 3 in 1 Laser Fully Automatic capabilities. Fully Automatic means the unit is specifically designed for horizontal work only. However this unit is capable of up to 9% gradient at 0.01% adjustments. The advantage of the automatic is purely for those who mostly use the unit for horizontal work and need to ensure the unit is going to be spot on under vibration or accidental knocks. The manual units above will continue to run no matter what happens. The L1-AS is designed for piece of mind and will stop rotating if knocked or excessive vibrations causing excessive inaccuracies. This particular unit is designed for very large sites where 180m radius is insufficient. Includes R7 Detector Options: W1 Wall/Ground Bracket, B1 Ni-Cad Charger Kit, S1 Compound Grade Kit and TEH Tripod Elevator Head. 3 Year Guardian Warranty

Range	305m (1000ft) radius
Acurracy	2.4mm at 30m (3/32 @ 100ft)
Self Leveling Range	± 4º
Grade Capability	Yes: Up to 9%, single axis
Compound Grade capability	Yes: requires optional S1 kit (for dual grade work)
Power	4 C-cell batteries
Battery Life	60+ hours
Rotating Speed	Fixed @ 600rpm
Laser Type	Class 1
Rechargable Battery Capabilty	Yes with optional B1 kit
Automatic Shut Off	Yes If off grade for more than 3 mins

L4 (External) The L4 is a 2 in 1 Auto-levelling unit where vertical and horizontal functionality is required. In terms of specifications this unit is in line with competition with respect to accuracy but with an unusual but useful range that fits in between the standard 150m or 300m radius systems on the market. Supplied with the R7 Receiver. This unit is priced well for its capabilities and should not be overlooked. Options: V1 Vertical Mount/Bracket, W1 Wall/Ground Bracket, R1 Ni-Cad Charger Kit and TEH Tripod Elevator Head. 3 Year Guardian Warranty

Range	230m (750ft) Radius
Accuracy	1.6mm at 30m (1/16 @ 100ft)
Self Leveling Range	10 arc minutes
Vertical Capability	Yes: Requires optional W1 V1
Power	4- C-cell
Battery Life	70+ Hours
Auto Shut Off	When off level >30 mins
Rotation	Fixed @ 600rpm

3 Year Guardian Warranty

L4+ Interior/Exterior A s traditional Interior lasers go this one is has what it takes. Has variable speed control to assist in tracing the beam and also to use as a pointer. The L4+ is for those who feel that an automatic laser is a necessity and to be as good as other main stream lasers for accuracy. L4+ has very good distance for external usage with the optional R7 Detector. You will need to use the supplied W1 wall mount (multi-purpose) to setup the laser true vertical. This unit can rotate the beam from 0 to 600 rpm. The fixed plumb beam is useful for transferring points from floor to ceiling (used with the P1 Plumb Plate), or for turning 90 degree angles If your work is solely external then the standard L4 should be considered. Supplied with W1 Wall/Ground Bracket and two MT Magnetic Target Options: R7 Detector, V1 Tripod Vertical Bracket, , R1 Ni-Cad Charger Kit, LG Laser Beam Enhancing Glasses, TEH Tripod Elevator Head and P1 Plumb Plate

Visible Range	60m (200ft) Radius
Range with R7 Detector	305m (1000ft) Radius
Accuracy	± 1.6mm per 30m (1/16" per 100ft)
Battery Life	70+ hours (Alkaline)
Rotation	Variable: 0 - 600 rpm
Scan Mode	Yes
Vertical Capability	Yes: with optional W1 Bracket
Power	4 C-cell batteries
Coverage	360º
Rechargable	yes: option R1 required

MC-1 The MC-1 is a self contained laser receiver and visual display that is designed for use on a backhoe or trencher. It enables the machine operator to take elevation readings from the the control seat. The electronics are housed in a heavy duty aluminum extrusion, and provide 8 inches (205mm) of receiving height in a 120 degree arc. The bright LED grade display can be seen at a distance, and provides 5 channels of information, high, high fine, on grade, low fine, and low. Controls consist of an on/off switch, and a switch to control the brightness of the LED display. The MC-1 will run for approximately 200 hours on 4 C alkaline batteries, or 70 hours on optional rechargeable Ni-Cds. The unit mounts to the stick of the backhoe with a section of steel channel and 4 weld on tabs. (Shown on MG1 magnetic mount.) Options: B40 Recharcheable Kit, MG1 Magnetic Mount, . 3 Year Guardian Warranty.